Astro Van 2WD V6-4.3L VIN W (2001)
Water Deflector Replacement - Sliding Door
REMOVAL PROCEDURE
IMPORTANT: Water deflectors seal the inner panel. Water deflectors prevent water from entering into the body. A strip of adhesive between the
deflector and the door secures the deflector.
1. Remove the garnish molding.
2. Remove the trim panel.
3. Peel the water deflector (1) away from the door.
INSTALLATION PROCEDURE
1. Install the water deflector (1).
IMPORTANT: Ensure that the water deflector is properly attached to the door in order to help prevent the intrusion of exhaust gases.
2. Install the trim panel.
3. Install the garnish molding.
