Astro Van 2WD V6-4.3L VIN W (2001)
Cross-Member: Service and Repair
Frame Stop Replacement
Frame Stop Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) in
General Information.
2. Remove the bolts that retain the frame stop to the frame.
3. Remove the frame stop.
Installation Procedure
1. Install the frame stop.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts that retain the frame stop to the frame.
Tighten the bolts that retain the frame stop to 35 Nm (26 lb.ft.).
3. Lower the vehicle.
