chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Body Side Front Lower Trim Panel Replacement|Page 9908 > < Body Side Front Lower Trim Panel Replacement|Page 9906
Page 3
background image

4. Use the J 38778   in order to remove the body side front upper trim panel from the vehicle.
5. Disconnect the electrical connector from the rear audio controls, if equipped.
6. Remove the rear audio controls from the trim panel. Refer to Rear Seat Audio Control Replacement    in Entertainment.

Installation Procedure

1. Install the rear audio controls to the trim panel, if equipped. Refer to Rear Seat Audio Control Replacement    in Entertainment.
2. Connect the electrical connector to the rear audio controls.

3. Install the body side front upper trim panel to the vehicle:

1. Align the retaining clips with the holes in the body.
2. Press the panel in order to seat the fasteners into place.

Notice:  Refer to Fastener Notice in Cautions and Notices.

4. Install the retaining screw to the B pillar.

   Tighten the retaining screw to the B pillar to 2 Nm (18 lb.in.).

5. Install the intermediate swing-out window latch. Refer to Swing Out Window Replacement   (See: Windows and Glass/Windows/Window

Glass/Quarter Window Glass/Service and Repair/Swing Out Window Replacement) in Stationary Windows.

6. Install the body side front lower trim panel. Refer to Body Side Front Lower Trim Panel Replacement   (See: Body Side Front Lower Trim Panel

Replacement).

Body Side Trim Panel Replacement - Left Side

Body Side Trim Panel Replacement - Left Side

Tools Required

J 38778  Door Trim Pad and Garnish Clip Remover

Removal Procedure

Body Side Front Lower Trim Panel Replacement|Page 9908 > < Body Side Front Lower Trim Panel Replacement|Page 9906