Astro Van 2WD V6-4.3L VIN W (2001)
1. Install the sliders into the slots in the side rails.
2. Install the screws into the sliders and the lock plates.
3. Install the cross rails onto the sliders.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the screws to the cross rails.
Tighten the screws to 2 Nm (18 lb.in.).
5. Install the side rail supports to the side rails.
6. Install the screws to the side rail supports.
Tighten the screws to 2 Nm (18 lb.in.).
7. Install the side rail support gaskets to the roof.
8. Install the luggage carrier as an assembly onto the roof with an assistant.
9. Install the screws to the end supports.
Tighten the screws to 3 Nm (27 lb.in.).
10. Install the screws into the center supports.
Tighten the screws to 3 Nm (27 lb.in.).
11. Install the rubber side rail cap onto the center support.
