Astro Van 2WD V6-4.3L VIN W (2001)
Seat Back: Service and Repair
Driver or Passenger Seat Back Cushion Frame Replacement
Driver or Passenger Seat Back Cushion Frame Replacement
Removal Procedure
1. Remove the bucket seat from the vehicle. Refer to Bucket Seat Replacement (See: Service and Repair/Bucket Seat Replacement).
2. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement (YC5 and YC6) (See: Seat Back Cover and Pad
Replacement (YC5 and YC6))Seat Back Cover and Pad Replacement (YC7) (See: Seat Back Cover and Pad Replacement (YC7)).
3. Remove the lumbar support cable. Refer to Lumbar Support Cable Replacement (See: Service and Repair/Lumbar Support Cable Replacement).
4. Remove the bolts from the seat back hinges on the right and left side.
5. Remove the seat back frame.
Installation Procedure
1. Install the seat back frame.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts to the seat back hinges on the right and left side.
Tighten the bolts to the seat back hinges on the right and left side to 30 Nm (22 lb.in.).