Astro Van 2WD V6-4.3L VIN W (2001)
11. Remove the wheel lug nut securing the rotor to the hub.
12. Measure the clearance between the caliper and the steering knuckle.
Measure the clearance at each end of the caliper individually and then add the measurements together.
Specification
The total should be 0.26 - 0.60 mm (0.010 - 0.024 inch).
^
If the total clearance between the caliper and the steering knuckle is less than 0.26 mm (0.010 inch), file the steering knuckle equally on each
side until the proper clearance is obtained.
^
If the total clearance between the caliper and the steering knuckle is more than 0.60 mm (0.024 inch), inspect the brake caliper and the
steering knuckle for damage and replace as needed.
13. Install the tire and wheel.
14. Lower the vehicle.
15. Fill the master cylinder to the proper level with clean brake fluid.
16. Bleed the brake system.
