Astro Van 2WD V6-4.3L VIN W (2001)
Brake Adjuster: Service and Repair
Adjusting Screw Replacement
Adjusting Screw Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake drum.
4. Remove the brake shoe return springs.
5. Remove the brake shoe guide.
6. Remove the hold down springs.
7. Remove the hold down pins.
8. Remove the actuator lever and the actuator lever pivot.
9. Remove the actuator lever and the lever pivot.
10. Remove the lever return spring.
