Astro Van 2WD V6-4.3L VIN W (2001)
3. Connect the engine oil cooler lines to the connector fittings.
^
Verify that a click is heard or felt.
^
Pull back sharply on the cooler lines in order to assure that the line fastens into the connector fittings.
4. Connect the engine oil cooler lines to the engine clip.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the engine clip bolt.
Tighten the engine clip bolt to 10 Nm (89 inch lbs.).
6. Install the engine oil cooler lines to the oil filter adapter assembly.
Tighten the oil cooler lines to oil filter adapter assembly bolt to 35 Nm (26 ft. lbs.).
7. Start the engine. Check the oil cooler lines for leaks.
