Astro Van 2WD V6-4.3L VIN W (2001)
Procedure.
10. Inspection of the fasteners eliminates the installment of incorrect: bolts, nuts, spacers, or washers.
12. Inspecting the pulleys for being bent should include inspecting for a dent or other damage to the pulleys that would prevent the drive belt from not
seating correctly in all of the pulley grooves or on the smooth surface of a pulley when the back side of the belt is used to drive the pulley.
14. Replacing the drive belt when it is not damaged, or if there is no excessive pilling will be a temporary repair.