chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Idler Pulley > < Engine Mount|Left|Page 2349
Page 4
background image

5. Lower the engine.
6. Install the engine mount through- bolt and the nut.

Tighten the engine mount through-bolt nuts to 68 Nm (50 ft. lbs.). 

7. Install the starter. 
8. Install the right fender wheelhouse extension. 
9. Install the right front tire. 

10. Lower the vehicle.
11. Connect the battery negative cable. 

Idler Pulley > < Engine Mount|Left|Page 2349