Astro Van 2WD V6-4.3L VIN W (2001)
1. Lubricate the engine oil filter gasket with clean engine oil.
2. Install the engine oil filter.
3. Follow the tightening instructions on the oil filter.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the drain plug to the oil pan.
Tighten the oil pan plug to 25 Nm (18 ft. lbs.).
5. Remove the safety stands and lower the vehicle.
6. Fill the engine with the proper capacity and quality of engine oil.
7. Operate the engine, check for leaks and oil pressure.
8. Check the oil level and add as required.
