Astro Van 2WD V6-4.3L VIN W (2001)
16. Connect the following electrical connectors:
^
The A/C compressor clutch, if equipped (1)
^
The A/C high pressure cutoff switch, if equipped (5)
^
The Throttle Position (TP) sensor (2)
^
The Idle Air Control (IAC) motor (3)
^
The fuel meter body assembly connector (4)
17. Connect the following electrical connectors:
^
The Manifold Absolute Pressure (MAP) sensor(4)
^
The EVAP canister purge solenoid valve (1)
18. Install the engine wiring harness bracket and nut to the intake manifold stud.
Tighten the engine wiring harness bracket nut to 12 Nm (106 inch lbs.).
19. Install the A/C hose bracket and nut, if equipped to the intake manifold stud.
