Astro Van 2WD V6-4.3L VIN W (2001)
1. Install the accumulator mounting bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the accumulator mounting bracket bolt.
Tighten
Tighten the mounting bracket bolt to 4 N.m (35 lb in).
3. Install the pressure switch.
4. Connect the electrical connections.
5. Coat the O-ring seals with 525 viscosity refrigerant oil.
6. Install new O-ring seals.
7. Install the compressor suction hose (7) to the accumulator.
8. Install the accumulator nut (1) to the evaporator.
Tighten
Tighten the accumulator nut to the evaporator to 27 N.m (20 lb ft).
9. Evacuate and charge the system. Refer to Refrigerant Recovery and Recharging.
10. Leak test the fitting(s) of the repaired or reinstalled component using the J 39400-A.
11. Install the air cleaner.
