Astro Van 2WD V6-4.3L VIN W (2001)
1. Connect the following items to the HVAC control assembly:
^
The vacuum connectors
^
The electrical connectors
2. Align the tab on the HVAC control assembly with the slot in the IP.
3. Install the HVAC control assembly to the IP.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the screw to the HVAC control assembly.
Tighten
Tighten the screw to the HVAC control assembly to 2 N.m (18 lb in).
5. Install the IP cluster trim plate.
