Astro Van 2WD V6-4.3L VIN W (2001)
TIGHTEN
Screws to the evaporator case to 6 Nm (53 lb in).
3. Install the outer case to the evaporator module.
TIGHTEN
Screws to the evaporator case to 6 Nm (53 lb in).
4. Install the evaporator tube to the evaporator.
^
Evaporator Tube Replacement
^
Evaporator Tube Replacement - Auxiliary Front
5. Install the bypass valve bracket to the outer case.
6. Install the evaporator to the accumulator.
7. Install the compressor hose assembly to the accumulator.
8. Install the relay bracket.
9. Connect the electrical connectors.
10. Install the coolant recovery reservoir.
11. Refill the engine coolant.
12. Evacuate and recharge the system.
13. Install the air cleaner.