Astro Van 2WD V6-4.3L VIN W (2001)
5. Install the grille.
6. Coat the O-ring with 525 viscosity refrigerant oil.
7. Install the new O-ring seal.
8. Install the evaporator tube to the evaporator.
Tighten
Tighten the evaporator tube nut (3) to 28 N.m (20 lb ft).
9. Install the evaporator tube to the auxiliary A/C evaporator underbody front tube assembly (if equipped).
Tighten
Tighten the evaporator tube nut to the auxiliary A/C evaporator to 28 N.m (20 lb ft).
10. Evacuate and recharge the system. Refer to Refrigerant Recovery and Recharging.
11. Leak test the fittings of the component using the J 39400-A.
12. Install the air cleaner.
