Astro Van 2WD V6-4.3L VIN W (2001)
-
Always wear eye protection when changing a halogen bulb.
-
Handle the bulb only by its base. Avoid touching the glass.
-
Keep dirt and moisture off the bulb.
-
Properly dispose of the used bulb.
-
Keep halogen bulbs out of the reach of children.
1. Install the headlamp bulbs.
2. Connect the headlamp electrical connectors.
3. Install the headlamp assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the bolts in order to retain the composite headlamp.
Tighten
Tighten the composite headlamp bolts to 13 N.m (115 lb in).
5. Install the corner capsule.
6. Install the corner capsule screw.
Tighten
Tighten the corner capsule screw to 5 N.m (44 lb in).
7. Close the hood.