Astro Van 2WD V6-4.3L VIN W (2001)
10. Remove the compressor hose assembly nut (6) from the condenser.
11. Remove the compressor hose assembly nut (1) from the accumulator.
12. Remove the bolt from the transmission filler tube to the oil indicator tube.
13. Remove transmission filler tube from the throttle cable bracket.
14. Remove the compressor hose assembly from the vehicle.
15. Cap or plug all open connections on the vehicle.
INSTALLATION PROCEDURE
1. Uncap or unplug all open connections.
2. Install the compressor hose assembly to the vehicle.
3. Install transmission filler tube to the throttle cable bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the bolt to the transmission filler tube to the oil indicator tube.
Tighten
Tighten the bolt to the transmission filler tube to the oil indicator tube to 12 N.m (106 lb in).
5. Install the compressor hose assembly nut (1) to the accumulator.
Tighten
Tighten the compressor hose assembly nut (1) to the accumulator to 48 N.m (35 lb ft).
6. Install the compressor hose assembly nut (6) to the condenser.