Astro Van 2WD V6-4.3L VIN W (2001)
7. Remove the bolts (1) that retain the clips on the auxiliary side inlet tube (3) to the body.
8. Remove the auxiliary evaporator side inlet tube (3) from the vehicle.
INSTALLATION PROCEDURE
1. Install the auxiliary evaporator side inlet tube (3) to the vehicle.
NOTE: Refer to Fastener Notice in Caution and Notices.
2. Install the bolts that retain the clips on the auxiliary evaporator side inlet tube (3) to the body.
Tighten
Tighten the bolts that retain the clips on the auxiliary evaporator side inlet tube (3) to 4 N.m (35 lb in).
3. Install the new O-ring seal. Coat the O-ring seal with 525 viscosity refrigerant oil.
