Astro Van 2WD V6-4.3L VIN W (2001)
1. Install the fuel meter body in the intake manifold.
2. Push the fuel meter body into the bracket. Make sure all of the tabs are locked into place.
CAUTION: Verity that the poppet nozzles are firmly seated and locked in their casting sockets in order to reduce the risk of fire and
personal injury. An unlocked poppet nozzle could work loose from its socket and produce a fuel leak.
IMPORTANT: The fuel meter body assemblies are numbered to indicate poppet nozzle order.
3. Push the poppet nozzles into the casting sockets.
4. Inspect the poppet nozzles in order to ensure they are firmly seated and locked in the casting sockets.
5. Install the upper intake manifold assembly.
6. Connect the negative battery cable.
7. Inspect for leaks.
7.1. Turn ON the ignition, with the engine OFF for 2 seconds.
7.2. Turn ON the ignition for 10 seconds.
7.3. Turn ON the ignition, with the engine OFF.
7.4. Inspect for fuel leaks.
8. Install the engine cover.
