Astro Van 2WD V6-4.3L VIN W (2001)
8. Disconnect the fuel return (5) and the fuel feed (2) pipes from the fuel tank pipes (1).
9. Release the fuel pipe grommet (4) from the crossrail.
10. Remove the fuel pipe retainer (3) from the crossrail.
11. Release the fuel pipes from the retainer and the grommet.
INSTALLATION PROCEDURE
CAUTION: Refer to Fuel Pipe Fitting Caution in Service Precautions.
1. Install the new O-rings on the engine fuel feed and return pipes.
2. Position the fuel pipes into the crossrail retainer and the crossrail grommet.
3. Position the new fuel pipes through the crossrails in the original location.
4. Loosely assemble the fuel feed pipe (1) to the fuel filter.
5. Loosely assemble the fuel return pipe (2) to the coupler (3).
