Astro Van 2WD V6-4.3L VIN W (2001)
Cruise Control Module: Service and Repair
CRUISE CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the cruise control cable.
2. Disconnect the electrical connector.
3. Remove the cruise control module bolts.
4. Remove the cruise control module.
INSTALLATION PROCEDURE
1. Install the cruise control module.
NOTE: Refer to Fastener Notice in Service Precautions
2. Install the cruse control module bolts.
Tighten
Tighten the cruise control module bolts to 12 N.m (106 lb in).
3. Connect the electrical connector.
4. Install the cruise control cable.
5. Perform the functional check.