Astro Van 2WD V6-4.3L VIN W (2001)
Knee Diverter: Service and Repair
Knee Bolster Replacement - Left
REMOVAL PROCEDURE
1. Remove the screws that retain the bolster to the instrument panel.
2. Pull back on the bolster in order to release the two retainers and remove the bolster.
3. Remove the parking brake release lever from the knee bolster.
INSTALLATION PROCEDURE
1. Install the parking brake release lever to the knee bolster.
2. Install the knee bolster:
2.1.
Align the retainers.
2.2.
Press the panel into place.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the screws that retain the knee bolster to the instrument panel.
Tighten
Tighten the knee bolster screws to 8 N.m (71 lb in).