Astro Van 2WD V6-4.3L VIN W (2001)
5. Install the seat belt bolt to the rear floor.
Tighten
Tighten the seat belt bolt to the rear floor to 53 N.m (39 lb ft).
6. Install the left rear bucket seat.
Right Rear
REMOVAL PROCEDURE
1. Remove the trim cover from the rear seat belt retractor, by grasping the sides and pull downward.
2. Remove the seat belt retractor buckle from the latch.
2.1.
Locate the red dot in the center of the buckle.
2.2.
Insert a small pointed fool in the center of the buckle.
2.3.
Push inward for it to release from the latch,