chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Starting System > < Diagram Information and Instructions|Page 7228
Page 2
background image

Tighten
^

Tighten the mounting bolts to 50 N.m (37 lb ft).

^

Tighten the generator output (BAT) terminal nut to 20 N.m (15 lb ft).

5. Connect the regulator electrical connector.
6. Install the drive belt.
7. Install the air cleaner.
8. Connect the battery negative cable.

Starting System > < Diagram Information and Instructions|Page 7228