Astro Van 2WD V6-4.3L VIN W (2001)
2. Install the new prevailing torque nut (2) to the pitman arm (3) ball stud.
-
Tighten the nut to 62 Nm (48 ft. lbs.).
3. Use the J29193 in order to install the connecting rod (1) ball stud to the relay rod (4).
Ensure that the seal is on the stud.
-
Tighten the J 29193 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
4. Remove the J29193.
5. Install the new prevailing torque nut (5) to the ball stud.
-
Tighten the nut to 47 Nm (35 ft. lbs.).
6. Lower the vehicle.
7. Adjust the toe-in. Refer to Front Toe Adjustment.