Astro Van 2WD V6-4.3L VIN W (2001)
Torsion Bar: Service and Repair
Tools Required
-
J 36202 Torsion Bar Unloading/Loading Tool
Removal Procedure
Notice: Use care when handling the torsion bars in order to avoid chipping or scratching the coating. Damage to the coating will result in premature
failure of the torsion bars.
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Install the J 36202 to the torsion bar adjuster arm.
3. Using the J 36202, increase the tension on the adjustment arm.
4. Remove the adjustment bolt and the retaining nut. Record the number of turns required in order to remove the adjuster bolt.
5. Remove the J 36202 from the adjuster arm.