Astro Van 2WD V6-4.3L VIN W (2001)
Band Apply Servo: Service and Repair
2-4 Servo
^
Tools Required
-
J29714-A Servo Cover Depressor
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the oil pan bolt below and to the left of the 2-4 servo cover.
3. Install the J29714-A to the oil pan rail.
4. Tighten the bolt on the J29714-A in order to compress the servo cover.
5. Remove the servo cover retaining ring.
6. Loosen the bolt on the J 29714-A to release tension on the servo cover.
