Astro Van 2WD V6-4.3L VIN W (2001)
Flex Plate: Service and Repair
Flywheel to Torque Converter Bolt Replacement
Flywheel to Torque Converter Bolt Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the starter.
3. Remove the converter housing access plug.
4. Mark the converter and flywheel orientation for proper alignment during installation.
5. Remove the flywheel to converter bolts.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the flywheel to converter bolts. Align the marks made during removal. Do not draw the converter to the flywheel with the bolts. Hand start