Astro Van AWD V6-4.3L VIN X (2003)
Garnish Molding Replacement - Sliding Door
Garnish Molding Replacement - Sliding Door
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the swing-out window latch from the door, if equipped. Refer to Window Replacement - Swing Out (See: Windows and
Glass/Windows/Service and Repair/Removal and Replacement/Window Replacement - Swing Out) .
2. Remove the door handle bezel screws.
3. Remove the door handle bezel.
4. Use J 38778 in order to release the molding retainers.
Installation Procedure
1. Install the door garnish molding to the vehicle:
1. Align the retainers to the holes in the door.
2. Press the panel in order to engage the retainers into the door.
2. Install the door handle bezel to the door.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the door handle bezel screws.
Tighten the door handle bezel screws to 2 N.m (18 lb in).
4. Install the swing-out window latch to the door, if equipped. Refer to Window Replacement - Swing Out (See: Windows and
Glass/Windows/Service and Repair/Removal and Replacement/Window Replacement - Swing Out) .
Garnish Molding Replacement - Upper Roller Track
Garnish Molding Replacement - Upper Roller Track
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
