Astro Van AWD V6-4.3L VIN X (2003)
1. Install the upper ball joint to the upper control arm.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the upper ball joint to the upper control arm mounting bolts and nuts.
-
Tighten the upper ball joint to the upper control arm mounting nuts to 30 Nm (22 ft. lbs.).
3. Install the speed sensor bracket to the upper control arm mounting bolt and nut.
-
Tighten the wheel sensor bracket to upper control arm mounting nut to 16 Nm (12 ft. lbs.).
4. Install the brake hose bracket to the upper control arm mounting bolt and nut.
-
Tighten the brake hose bracket to upper control arm mounting nut to 16 Nm (12 ft. lbs.).