Astro Van L AWD V6-262 4.3L VIN W CPI (1992)
Fig. 2 Rear Engine Mount Replacement. 1993 AWD Models
FRONT
1.
Remove mount retaining bolt from below frame mounting bracket.
2.
Raise front of engine to remove weight from mount and to place a slight tension on the rubber cushion, remove mount attaching bolts, then the
mount, Fig. 1. Check for interference between rear of engine and cowl panel. Raise engine only enough to provide sufficient clearance for
mount removal.
3.
Reverse procedure to install.
REAR
1.
Support transmission to relieve weight from rear mounts.
2.
Remove crossmember-to-mount attaching nuts.
3.
Remove mount attaching bolts, then raise transmission and remove mount, Fig. 1. Fig and 2.
4.
Reverse procedure to install. Align mount to crossmember when lowering transmission into position.
