chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Outside Handle and Lock Cylinder|Page 7327 > < Body/Frame - R/H Rear Cargo Door Handle Broken|Page 7324
Page 1
background image

Rear Door Handle: Service and Repair
Outside Handle and Lock Cylinder

Remove or Disconnect

1. Door trim panel.
2. Control rod from the outside handle. Pry the clip anchor out of the hole and push the clip away from the lever. Pull the rod and the clip away from

the lever.

3. Outside handle nuts.
4. Outside handle.
5. License plate housing bolts.
6. License plate housing.
7. Door lock shield.
8. Control rod from the lock cylinder. Pry the clip anchor out of the hole, and push the clip away from the lever. Pull the rod and the clip away from

the lever.

9. Lock cylinder retainer.

10. Lock cylinder.

Install or Connect

1. Clip to the lock cylinder.
2. Lock cylinder to the door.
3. Lock cylinder retainer.
4. Control rod to the lock cylinder through the clip.
5. Door lock shield.
6. License plate housing.
7. License plate housing bolts.
8. Clip to the outside handle.
9. Outside handle to the door.

10. Outside handle nuts.
11. Control rod to the outside handle through the clip.
12. Door trim panel.

Outside Handle and Lock Cylinder|Page 7327 > < Body/Frame - R/H Rear Cargo Door Handle Broken|Page 7324