chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power Door Lock Control Module > < Front Doors|Page 7486
Page 2
background image

Install or Connect

1. Lever to the door.
2. Lever to door fasteners. Use a 6 mm (1/4 inch) diameter bolt 13 mm (1/2 inch) long with a spring washer, and nut, to re-attach the lever to the

door.

3. Control rods to lever.
4. Door trim panel.

Lower Door Lock Actuator

Remove or Disconnect

1. Negative (-) battery cable.
2. Door trim panel.
3. Actuator to lever rod.
4. Actuator to door rivets. Drill out the head of the rivet using a 5 mm (3/16 inch) drill bit.
5. Actuator from the door.

Install or Connect

1. Actuator to the door.
2. Actuator to door fasteners. Use a 6 mm (1/4 inch) diameter bolt 13 mm (1/2 inch) long with a spring washer, and nut, to re-attach the actuator to

the door.

3. Actuator to lever rod.
4. Door trim panel.
5. Negative (-) battery cable.

Power Door Lock Control Module > < Front Doors|Page 7486