Astro Van L AWD V6-262 4.3L VIN Z (1994)
1. Heater blower switch, if removed.
^
Hold the blower switch in position and install the spring clip.
^
Install the blower switch knob.
2. Control cables.
3. Electrical connector(s), as necessary.
4. Control assembly.
5. Screws.
^
Tighten screws to 1.4 N.m (12 in. lbs.).
^
Check circuit operation.
Rear
Auxiliary Control Switch
REMOVE OR DISCONNECT
1. Control switch.
2. Electrical connection.
INSTALL OR CONNECT
1. Electrical connection.
2. Control switch.
^
Check circuit operation.
