Chevrolet Workshop Service and Repair Manuals

Alignment: Specifications
Alignment Specifications

Front Alignment Specifications

Caster Angle, Degrees 

Limits .........................................................................................................................................................................................................  +2.05 to +4.50
Desired ...........................................................................................................................................................................................................  .01 to +1.77

Camber Angle, Degrees .......................................................................................................................................................................................................  

Limits

Left ............................................................................................................................................................................................................  .01 to +1.77
Right .........................................................................................................................................................................................................  .01 to +1.77

Desired

Left .........................................................................................................................................................................................................  +.49 to +1.29
Right .......................................................................................................................................................................................................  +.49 to +1.29

Toe-In, Degrees [03] ..................................................................................................................................................................................  +.05 to +.15 [03]

Ball Joint Wear ..............................................................................................................................................................................................................  [04]

[03] Left & right toe-in is set separately at each wheel w/ steering wheel held in straight ahead position.
[04] Refer to /Steering & Suspension/ Suspension/ Ball Joint/ Testing & Inspection.

Rear Alignment Specifications

Camber Angle, Degrees [01]

Limits ..................................................................................................................................................................................................................... -3 to +5
Desired ............................................................................................................................................................................................................................  1

Toe Out, Degrees [01] ..............................................................................................................................................................................................  0 to .05

[01] Camber & toe are not adjustable