Astro Van L AWD V6-262 4.3L VIN Z (1994)
Power Steering Pump: Service and Repair
Removal/Installation
1. Disconnect battery ground cable, then place suitable drain pan under pump.
2. Loosen belt tensioner, then remove belt.
3. Remove rear brace attaching nuts, then the rear brace.
4. Remove pulley using puller tool No. J-29785-A, or equivalent.
5. Disconnect and cap pressure and return hoses.
6. Remove pump attaching bolts, then the pump.
7. Reverse procedure to install. Tighten mounting bolts, rear brace to stud nut and brace to pump nut to specifications.
