Astro Van L AWD V6-262 4.3L VIN Z (1994)
Wiper Switch: Service and Repair
Remove or Disconnect
NOTICE: Place ignition to "LOCK" position to prevent uncentering coil assembly (3).
1. Disable the SIR system.
2. Negative (-) battery cable.
3. Coil assembly retaining ring (2).
4. Inflatable restraint coil assembly (3).
a). Let switch hang freely if removal is not needed.
b). To remove coil assembly (3), do steps 5 through 17.
5. Wave washer (4).
6. Shaft lock spacer (7).
7. Shaft lock retaining ring (8) using 3 23653-SIR to push down shaft lock (9). Dispose of ring (8).
8. Shaft lock (9) from steering shaft assembly (46).
9. Turn signal cancel cam assembly (10).
