Astro Van L AWD V6-262 4.3L VIN Z (1994)
NOTICE: Coil assembly (3) will become uncentered if:
1). Steering column is separated from steering gear and is allowed to rotate, or
2). Centering spring is pushed down, letting hub rotate while coil (3) is removed from steering column.
17. Inflatable restraint coil assembly (3) with wire harness from column assembly.
a). Wiring protector (43).
b). Ensure that connector shroud (5) has been removed. Attach a length of mechanics wire to terminal connector to aid in reassembly.
c). Gently pull wire through column.
NOTICE: When removing buzzer switch assembly (18) buzzer switch retaining clip (42) may become disconnected. Ensure that retaining clip (42)
does not drop into column assembly. Failure to do so may result in component damage or malfunctioning of steering column.
18. Buzzer switch assembly (18) with buzzer switch retaining clip (42). Clip (42) from buzzer switch (18).
19. Lock retaining screw (19).
20. Steering column lock cylinder set (22).
Install or Connect
NOTICE: Ensure all fasteners are securely seated before applying needed torque. Failure to do so may result in component damage or
malfunctioning of steering column.
1. Steering column lock cylinder set (22).
2. Lock retaining screw (19). Tighten screw (19) to 4.5 N-m (40 lb.in.)
3. Buzzer switch retaining clip (42) to buzzer switch (18). Buzzer switch (18) with retaining clip (42) to steering column housing assembly (20).
Ensure that clip (42) does not drop into column assembly.
