Astro Van M L4-151 2.5L (1985)
-COVER ASSEMBLY, M VAN
Removal M Van To remove the cover, unscrew the two outboard nuts from the attaching studs. Loosen the two inboard nuts, install one hex nut (M6X1)
on each of the two inboard studs, and jam the nuts together. Using a small wrench, on the inner nut, unscrew the studs until the cover breaks loose. After
breaking the cover loose, remove the jammed nuts from each stud. Remove the cover from the studs. Examine the stud and rubber washer assembly and
replace if either stud or washer is damaged. Reassemble the two studs (see Figure No. 2) to the middle two positions and torque to 10 N-m (90 in.lbs.).
Use applicable labor operation number and labor time.