Astro Van M L4-151 2.5L (1985)
Wheel Bearing: Adjustments
FRONT WHEEL BEARINGS ADJUSTMENT
1.
Raise and support front of vehicle.
2.
While rotating wheel assembly in forward direction, torque spindle nut to 12 ft. lbs. to fully seat the bearings.
3.
Back off spindle nut until just loose, then tighten nut finger tight.
4.
Loosen nut until either hole in spindle aligns with a spindle nut slot, then install new cotter pin.
5.
Measure hub endplay, which should measure .001---.005 inch.
