chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Sliding Door > < Remote Control Assembly
Page 1
background image

Rear Door Latch: Service and Repair
Lock Assembly

Remove or Disconnect

1. Door trim panel.
2. Upper control to lock rods. Pry the clip anchor out of the hole, and push the clip away from the lever. Pull the rod and clip away from the lever.
3. Lower remote control to lock rods from the remote control. Use the procedure under step 2.
4. Lock screws.
5. Lock from the door.

Install or Connect

1. Clips to the lock and remote control lever.
2. Lock to the door.
3. Lock screws.
4. Control rods.
5. Door trim panel.

Sliding Door > < Remote Control Assembly