chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Idle Speed > < Fuel Pressure Gage Installation and Removal|Page 5388
Page 4
background image

3. Operate the vehicle within the conditions of the customer's concern while monitoring the fuel pressure with the CH-48027. The fuel pressure

should not drop off during acceleration, cruise or hard cornering.

^

If the fuel pressure drops off, test, inspect, and repair the items listed below. If all items test normal, replace the fuel pump module.

*

Restricted fuel feed pipe

*

Inspect the harness connectors and the ground circuits of the fuel pump for poor connections

4. If the fuel system tests normal, refer to Symptoms - Computers and Control Systems.  See: Powertrain Management/Computers and Control

Systems/Testing and Inspection/Symptom Related Diagnostic Procedures/Symptoms - Engine Controls

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.  See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests and Procedures

*

Fuel Hose/Pipes Assembly Replacement (1500 SWB - 98.4L (26 gal) Tank) Fuel Hose/Pipes Assembly Replacement (1500 SWB - 98.4L (26 gal)
Tank + E85) Fuel Hose/Pipes Assembly Replacement (1500 LWB - 117.3L (31 gal) Tank ) Fuel Hose/Pipes Assembly Replacement (1500 LWB -
117.3L (31 gal) Tank + E85)

*

Fuel Injector Replacement

*

Fuel Tank Fuel Pump Module Replacement (1500 Series) Fuel Tank Fuel Pump Module Replacement (1500 SWB - 98.4L (26 gal) Tank + E85)
Fuel Tank Fuel Pump Module Replacement (1500 LWB - 117.3L (31 gal) Tank + E85) Fuel Tank Fuel Pump Module Replacement (2500 LWB -
98.4L (26 gal) Tank-Front) Fuel Tank Fuel Pump Module Replacement (2500 LWB - 43.5L (11.5 gal) Tank-Rear)

Idle Speed > < Fuel Pressure Gage Installation and Removal|Page 5388