Avalanche 1500 2WD V8-5.3L (2008)
Tighten the bolt to 12 N.m (106 lb in).
5. Remove the caps from the fuel and EVAP lines.
6. Connect the chassis EVAP line quick connect fitting (4) to the fuel tank line.
7. Connect the fuel tank fuel feed line quick connect fitting (5) to the chassis line.
8. If equipped with 4WD, install the fuel hose/pipe clip to the bracket on the transfer case.
9. Install the fuel line clip to the bracket on the automatic transmission.
10. Install the fuel pipe bracket nut to the bellhousing stud.
Tighten the nut to 20 N.m (15 lb ft).
11. Position and install the front propeller shaft. Refer to Front Propeller Shaft Replacement.
