Avalanche 1500 2WD V8-5.3L (2008)
Notice: Refer to Fastener Notice .
2. Install the upper control arm bolts.
Tighten the nuts to 190 N.m (140 lb ft).
3. Connect the upper control arm to the steering knuckle .
4. Install the new nut to the upper ball joint stud.
Tighten the nut to 50 N.m (39 lb ft).
5. Install the retaining bolts for the brake hose and wheel speed sensor brackets.
Tighten the bolts to 9 N.m (80 lb in).
6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
7. Lower the vehicle.
8. Verify the wheel alignment. Refer to Wheel Alignment Specifications (See: Alignment/Specifications) .
Upper Control Arm Replacement (1500)
Upper Control Arm Replacement (1500)