Avalanche 1500 2WD V8-5.3L (2008)
8. Install the retainer securing the cable to the steering column.
9. Position the carpet and insulation around the driver's area.
10. Install the drivers seat. Refer to Front Seat Replacement - Bucket (without HP2) Front Seat Replacement - Bucket (with HP2) .
11. Install the instrument panel knee bolster. Refer to Knee Bolster Replacement (Except Cadillac) Knee Bolster Replacement (Cadillac) .
12. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
13. Align and install the cable to the bracket.
14. Install the range selector cable end (2) to the transmission range selector lever ball stud (1).
15. Install the cable clip on the transfer case, if equipped.
16. Install the retainer that secures the cable to the bracket.
