Avalanche 1500 2WD V8-5.3L (2008)
Shift Cable: Service and Repair
M99 - Automatic Transmission
Range Selector Lever Cable Replacement
Removal Procedure
1. Position the steering column shift lever to the park position.
2. Remove the instrument panel knee bolster. Refer to Knee Bolster Replacement (Except Cadillac) Knee Bolster Replacement (Cadillac) .
3. Remove the driver seat. Refer to Front Seat Replacement - Bucket (without HP2) Front Seat Replacement - Bucket (with HP2) .
4. Pull back the carpet and insulation around the driver area.
5. Remove the retainer securing the cable to the steering column.
6. Remove the cable end from the steering column ball stud.
7. Depress the tangs and remove the cable from the steering column bracket.