Avalanche 1500 2WD V8-5.3L (2008)
3. Position the outer bearing cup in the wheel hub.
Important: When installing the outer bearing assembly, ensure that the bearing assembly below the retaining ring groove. DO NOT
bottom out the bearing assembly in the bore.
4. Using the J 44419 (2) and the J 8092 (1), install the outer bearing cup in the wheel hub.
Important: Ensure that the retaining ring is fully seated in the groove.
5. Install the retaining ring into the groove.
Important: After installing the outer bearing assembly, ensure that the bearing rotates freely in the wheel hub.
6. Using the J 24426 (2) and the J 8092 (1), seat the outer bearing assembly against the retaining ring.