Avalanche 1500 2WD V8-5.3L (2008)
7. Install the J 8614-01 as shown.
8. Remove the pinion nut while holding the J 8614-01 .
9. Remove the washer.
10. Install the J 8614-2 (2) and the J 8614-3 (3) into the J 8614-01 (1) as shown.
11. Remove the pinion yoke by turning the J 8614-3 (3) clockwise while holding the J 8614-01 (1).
12. Using a suitable tool, remove the drive pinion seal (1).
Installation Procedure