Avalanche 1500 2WD V8-5.3L VIN Z Flex Fuel (2005)
3. If equipped, install the engine shield.
4. Install the engine shield bolts.
^
Tighten the bolts to 20 Nm (15 ft. lbs.).
5. If equipped with a 8.1L engine perform the following:
Important:
^
Ensure the oil cooler line being installed has a plastic cap on the end that connects to the quick connect fitting. If no plastic cap exists, or the
plastic cap is damaged, obtain a new cap. Install the cap onto the cooler line prior cooler line installation.
^
Do not use the plastic cap in order to install the cooler line into the fitting.
6. Install the oil cooler hoses to the clip.
